1988 White T-bar

[MR2 Michael]

Happy new Year.
That crash bar looks in great condition. I got a replacement one for mine in the end.
Great to see all the work that you are doing, looking forward to seeing this car one day!

[Rich135]

The powder coated parts have arrived! First pic of the fans back together....

[jed]

Great result, when I refurbished mine trust you had not to drill out the underside fixing bolts, 2 of the bolts broke, well worth the effort, keep updating the thread

[Rich135]

Thanks. Luckily the only screws I couldn't get out where the little cross-heads holding the fans onto the fan shrouds, so they were pretty easy to dremel and grove to use a flat screwdriver on. The bolts at the bottom of the fan shrouds must have been a real PITA!

[Rich135]

A few more parts done. On to fitting the bumper next.

[MR2 Michael]

A few more parts done. On to fitting the bumper next.

Now that looks rather good!! You must be so pleased

[Rich135]

Now that looks rather good!! You must be so pleased

Thanks Michael - I sure am!

[Rich135]

Bumper and bar underneath back on. Just the headlights to go now.

[Martin42006]

Looking sharp, well done.
A suggestion is to fill the bumper bar with a cavity wax, that way the inside should be kept in good nick too.

[Rich135]

Looking sharp, well done.
A suggestion is to fill the bumper bar with a cavity wax, that way the inside should be kept in good nick too.

Thanks Martin, I have done that already I also put a coating of Dinitrol on the outside of the bar after the above photo's and before it was covered up, as belt and braces.