Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Yorkshire Meet/Play Day - Saturday October 13th

  1. #1
    MR2 Newbie samwell's Avatar
    Join Date
    Apr 2012
    Location
    Sheffield
    Posts
    69

    Yorkshire Meet/Play Day - Saturday October 13th

    Right, bit of a long shot as I know I'm not an established member, but... Would anyone consider a meet in Sheffield (similar to the 1 organised by Douglas and Tom) where I have a fairly kitted out garage (lots of tools, jacks, pillar drill, grinder, welder, etc.) and also a poorly MR2 that requires a bit of attention in the form of some welding to the chassis rails?
    I have decent spanner sense and I'll take on most jobs but despite owning a welder, I have never done anything complicated with it. I would obviously provide lots of food & drink of whatever type and anyone can come and use my tools and chat/swap advice & stories, get bits done to their car with possibly the aim of patching up the front of mine to MOT standard...

    There might be a chance to scavenge any bits of my car if someone condemns it too so it could turn into an autojumble...

    There's plenty of drive space around mine and I'm pretty close to some very good driving roads (Fulwood is on the RHS of this map http://goo.gl/maps/GFOzG).

    I'm pretty flexible on dates but I guess it would be better to do it before the winter weather sets in so I've suggested a fortnights time to try and beat the freeze...

    Available on 13th/14th
    Samwell
    Coverco
    Maybe - tommundy & julianw

    Available on 20th
    Samwell
    Tommundy
    Last edited by samwell; 4th October 2012 at 02:01 PM.

  2. #2
    MR2 Mk1 Club Chairman tommundy's Avatar
    Join Date
    Jan 2009
    Location
    Sheffield, UK
    Posts
    2,896
    Hi Sam,

    Great idea! Have you got any pictures of the welding that's required?

    I may be working that Saturday but if not I'll gladly come along. I'm busy on the Sunday too. I'm totally free the following weekend though!

    Cheers,
    Tom

  3. #3
    MR2 Fan julianw's Avatar
    Join Date
    Dec 2009
    Location
    Macclesfield, Cheshire
    Posts
    362
    Hi Sam
    If I don't have mine in bits spread out over my own garage, I'll try to come over and lend a hand. Again, not an experienced welder, me, but enthusiastic!

    Cheers
    89 Mk1 N/A Mica blue Owned 2012-Present
    89 Mk1 N/A Superwhite Owned 2004-Present
    96 LDV Convoy minibus Red Owned 2008-Present
    98 V70 AWD Owned 2007 - 2010 RIP
    1990 VW LT35 Motorhome White Owned 2005-Present
    97 Escort estate 1.8TD Red Owned 2003-2004 RIP
    99 Multipla 1.6 Red Owned 2002-2003
    71 Austin Maxi 1750 N/A Dunghill green Owned 1985-1989

  4. #4
    MR2 Newbie samwell's Avatar
    Join Date
    Apr 2012
    Location
    Sheffield
    Posts
    69
    As I said, I'm flexible on dates. The following Saturday would work just as well for me. I'll get some shots up tomorrow as I've started stripping down the area to get closer to it.

    Cheers

  5. #5
    MR2 Fan julianw's Avatar
    Join Date
    Dec 2009
    Location
    Macclesfield, Cheshire
    Posts
    362
    You said 'chassis rails' - is MIG welding going to be up to the job? Or do you have a stick welder or gas to hand as well or instead?
    89 Mk1 N/A Mica blue Owned 2012-Present
    89 Mk1 N/A Superwhite Owned 2004-Present
    96 LDV Convoy minibus Red Owned 2008-Present
    98 V70 AWD Owned 2007 - 2010 RIP
    1990 VW LT35 Motorhome White Owned 2005-Present
    97 Escort estate 1.8TD Red Owned 2003-2004 RIP
    99 Multipla 1.6 Red Owned 2002-2003
    71 Austin Maxi 1750 N/A Dunghill green Owned 1985-1989

  6. #6
    MR2 Obsessive
    Join Date
    Jan 2009
    Location
    Barnsley
    Posts
    1,988
    I should be able to come along Sam, not in my MR2 though it is sorned for winter. I have a mig and a stick welder so I will bring both. I will come in the van and load it with tools

  7. #7
    MR2 Newbie samwell's Avatar
    Join Date
    Apr 2012
    Location
    Sheffield
    Posts
    69
    I'm not sure on whether mig is up to it. I have 150amp MIG although I need a regulator for the gas as currently it's running gasless. As requested, a couple of picures of the NS from chassis rail.
    Just behind radiator cowling:

    Aaaargh!


    Front arm mount looks solid


    I don't want this just to be about patching mine up, like I said, I've got plenty of tools and space to sort out some other bits on other cars...

    Any preference on dates for those, I might put together a list on the first post for who can make what

    Sam

  8. #8
    ** Banned User **
    Join Date
    Nov 2009
    Location
    Stockport
    Posts
    1,025
    That looks a mammoth task to repair I've got some pictures of how I repaired mine but sadly when I went to the other side the leg was totaled thats why I bought another 2. If you want me to post them no worries just ask or pm me and i'll email them to you.

  9. #9
    ** Banned User **
    Join Date
    Nov 2009
    Location
    Stockport
    Posts
    1,025
    If you're fast I can cut a section of chassis leg out of my scrap shell for you.

  10. #10
    MR2 Obsessive
    Join Date
    Jan 2009
    Location
    Barnsley
    Posts
    1,988
    That does look pretty bad Sam, I have a small stick welder and am fairly good with it (not so good with mig). We can only try mate, get plenty of sheet metal in though

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •