Threaded View
Rich135 1988 White T-bar 11th June 2019,
07:47 AM
Tellso Nice one Rich. Welcome to the... 11th June 2019,
08:33 AM Martin42006 Welcome to the club. Nice to... 12th June 2019,
11:03 AM
Martin42006 Possibly, Jimi would be able... 12th June 2019,
12:08 PM
Gilles27 52005201520252035204 12th June 2019,
12:55 PM
Rich135 Thanks Gilles! My little... 12th June 2019,
12:56 PM
Gilles27 Ah well. You can't have too... 12th June 2019,
12:57 PM
Martin42006 Looks great. The low mileage... 12th June 2019,
06:06 PM
Martin42006 Sounds good. Make sure they... 13th June 2019,
09:14 AM
Tellso What a great example.... 14th June 2019,
08:49 AM
Rich135 I started to do some... 7th October 2019,
08:37 AM
Sillyhatday Get all the crap out behind... 7th October 2019,
09:39 AM
Rich135 Thanks for that tip, I did... 7th October 2019,
09:47 AM
Martin42006 Looks very tidy under there.... 7th October 2019,
09:51 AM
Evo4Jon Looks beautiful :0) 10th October 2019,
11:19 PM
Rich135 I thought I would give you... 6th November 2019,
10:22 AM
Sweetpea That's unbelievably tidy.... 6th November 2019,
09:31 PM
Rich135 It was a little bit messier... 7th November 2019,
08:13 AM
Sillyhatday Looks spot on under there... 10th November 2019,
04:16 PM
Martin42006 Does look nice and clean.... 11th November 2019,
07:16 AM
Rich135 Santa was nice to me this... 8th January 2020,
02:29 PM
Sillyhatday I had a set of Infinity... 8th January 2020,
09:25 PM
Rich135 Yes I think you are right, as... 9th January 2020,
08:16 AM
Martin42006 Looks like they will do the... 9th January 2020,
09:26 AM
Rich135 Ok I managed to find an hour... 10th January 2020,
05:33 PM
michaeljapp Looks like a great example,... 10th January 2020,
05:40 PM
Martin42006 If you want more bass then... 10th January 2020,
05:56 PM
Sweetpea Not sure I'd recommend the... 10th January 2020,
10:28 PM
Rich135 Thanks guys, all useful... 12th January 2020,
10:56 AM
Sillyhatday Dam, they look spot on! Real... 12th January 2020,
11:50 AM
Rich135 Thanks very much for those... 13th January 2020,
09:54 AM
Rich135 I know you guys like to hear... 18th January 2020,
04:31 PM
jimi For future reference, a bit... 19th January 2020,
01:03 AM
Rich135 Thanks for posting that up... 20th January 2020,
08:40 AM
jimi If your happy with the sound,... 20th January 2020,
11:34 AM
MR2 Michael It certainly looks like... 6th February 2020,
04:30 PM
Rich135 So the car has been at a... 10th February 2020,
08:23 AM
Rich135 New pin striping put on... 26th February 2020,
08:07 PM
Martin42006 Looking really tidy there.... 27th February 2020,
09:05 AM
Rich135 Thanks chaps. I have a few... 27th February 2020,
03:18 PM
Sweetpea Cam belt's not terrible in my... 27th February 2020,
09:18 PM
Martin42006 Cam belt is doable in an... 27th February 2020,
09:52 PM
julianw Iirc I made something similar... 28th February 2020,
12:22 AM
Rich135 Thanks everyone. After doing... 28th February 2020,
09:00 AM
Rich135 OK chaps, I need to keep... 30th March 2020,
08:08 AM
Rich135 OK the etch primer, silver... 31st March 2020,
09:54 AM
Rich135 OK, cam covers are back on,... 2nd April 2020,
04:21 PM
jimi Looks great :cool: 2nd April 2020,
08:30 PM
Sweetpea It does look great.
The OCD... 2nd April 2020,
09:56 PM
Martin42006 Engine bay looking really... 3rd April 2020,
08:48 PM
Rich135 Hi All,
I have only done a... 11th June 2020,
04:31 PM
Gannett Nice work. 12th June 2020,
03:48 PM
Rich135 Hi All, I have decided I am... 8th July 2020,
03:23 PM
Martin42006 I think they were powder... 10th July 2020,
06:04 AM
Rich135 Thanks very much Martin, I... 13th July 2020,
07:36 AM
Rich135 I found a powder coating... 16th July 2020,
09:22 AM
Rich135 I agree Martin. They are a... 17th July 2020,
06:56 AM
Gannett Very nice - and lots of fun... 22nd July 2020,
11:36 AM
Rich135 So, this happened on a drive... 24th July 2020,
03:36 PM
Rich135 Update on the headlight pods... 29th July 2020,
01:14 PM
Martin42006 That is a good price and... 30th July 2020,
07:14 AM
Rich135 Thanks guys. All fitted last... 30th July 2020,
01:36 PM
ziggy Hi Rich
Cheeky pm sent 31st July 2020,
01:23 PM
Rich135 Hi All
Another little... 20th November 2020,
02:23 PM
Sweetpea Nice!
The light mechs have... 21st November 2020,
10:13 PM
Rich135 Thanks very much. I was... 24th November 2020,
09:23 AM
Rich135 They need to be fitted at the... 25th November 2020,
09:29 AM
Tellso Very nice! Did you go with... 25th November 2020,
09:45 AM
Rich135 Yes I did. They seems great... 25th November 2020,
02:16 PM
Rich135 Ok wheels all fitted now. ... 26th November 2020,
03:21 PM
Tellso Really nice. Suit the car. I... 26th November 2020,
06:27 PM
Rich135 Oh yes, good point! I have... 27th November 2020,
09:34 AM
MR2 Michael They look very nice. And I... 27th November 2020,
01:57 PM
Rich135 I hope everyone has good a... 27th December 2020,
05:01 PM
Rich135 The powder coated parts have... 11th January 2021,
02:20 PM
Rich135 Thanks. Luckily the only... 11th January 2021,
03:59 PM
Rich135 A few more parts done. On to... 12th January 2021,
11:38 AM
Rich135 Bumper and bar underneath... 13th January 2021,
08:33 PM
Martin42006 Looking sharp, well done.
A... 14th January 2021,
01:10 PM
Rich135 All done and everything... 15th January 2021,
09:05 AM
Rich135 It was MOT day today and I am... 17th March 2021,
01:39 PM
Martin42006 Another pass is great news.... 17th March 2021,
03:17 PM
-
12th June 2019, 12:56 PM
#11
Thanks Gilles! My little brain figured it out while you were helping 
Last edited by Rich135; 12th June 2019 at 01:02 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
