Toyota Mr2 Mk1 CNC Machined Aluminium Replacement Gear Ratio Plates!

[Jak_01]

Hello,
We have made a few more MR2 MK1 replacement gear ratio plates and placed them up on Ebay. As you can see from the below pictures, this replacement plate will fit snugly over your scratched, faded, dull shift/ratio plate and enhance any MR2 interior without looking out of place. We have 2 designs available at the same price, firstly the standard replacement (same font/layout etc as original) which you can choose the engraved colour combination from the image below:
Please click on an image below to go to the eBay auction!


Or we have the plates with the MR2 logo engraved onto it:


Here is just some of the feedback we have had about these ratio plates from eBay customers:

"A+ Quliaty part and looks great!!"

"Nice smooth transaction and super quick delivery, quality OEM feel product.A+"

"Great customer service and item is of excellent quality when reordered later"

"many thanks< great item A++"

"Good quality, fast shipping"

If you are interested in these items then please click on one of the images above to go to the eBay page we are selling them from

Thank you for looking and if you have any questions please feel free to reply to this topic!
Jack

[greggessex]

Hi Jack,

Went to your ebay page and noticed you had the MR2 plates, but none of the original type listed. Does that mean you no longer produce them? If you do I would be very interested in a BLACK/RED one

Thanks

Gregg

[Jak_01]

Hi sorry for very late reply and thanks for the interest, yes we are always supplying them. Even if there are none on eBay, we can get some made. We have some on eBay at the moment here: http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT

Thanks
Jack

[magicrising]

Could I just let you know, the fixing tape you supply doesn't work. It is far too thin and doesn't seem to 'cure' I can lift my plate straight off after a month

[Boyzdad]

Could I just let you know, the fixing tape you supply doesn't work. It is far too thin and doesn't seem to 'cure' I can lift my plate straight off after a month

Thank you for your comments, I must say though, we have not had any other reports about this problem before.

Ref the "far too thin" if your original plate is flat, but scratched this will not be a problem. If the tape was any thicker it would raise the plate and spoil the look, particularly on a MK1a were there is very little room for error

Please make sure the surface (your original plate) is free of dirt/grease before attempting to stick the plate down, my plate that I have had on the car for over a year now is still stuck like the proverbial "s**t to a blanket".

I clean the back of each plate with acetone before sticking the tape, if you try to remove the tape from the back of the plate, you will see how well it sticks, I have had to do this before, not an easy job!

If your original plate is not flat, i.e. dented, please remove it before attempting to stick the new plate down.

If you would like, I will happily send you another piece of tape, simply PM me your address

[Fab4mr2]

Great to see you still churning out the MKI stuff Jack. I've had one of your early versions of the gear shift plate sitting around for a bit, and now that I have decided to keep the car that it was meant for I can't seem to find it, lol. I'll let you know soon if I need a replacement. Keep up the good work.

[Jak_01]

@Fab4mr2
Thank you, yes we are still producing these along with the 4AGE plates (and MR2 keyrings). And if you need a replacement we have some for sale on eBay now
http://shop.ebay.co.uk/matt_eb*y-uk/...id=p4340.l2562

Thank you
Jack

[Jak_01]

Update: Some more ratio plates have now been made and I have uploaded them to eBay
Link: http://www.ebay.co.uk/itm/260838908526

Thanks
Jack

[Jak_01]

http://www.ebay.co.uk/itm/260876672296

[Jak_01]

More ratio plates uploaded to eBay :
http://www.ebay.co.uk/itm/260935249878