Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: 1988 White T-bar

  1. #21
    MR2 Newbie
    Join Date
    May 2017
    Location
    Guildford
    Posts
    64
    Thanks for that tip, I did pull the front wheel arch lining out a bit and found myself pulling leaves out of the bottom of the arch! I will get the liner off completely once the front wheels are off and give it a good clean/protection.

    Noted on the rear arches.

  2. #22
    MR2 Obsessive Martin42006's Avatar
    Join Date
    Nov 2013
    Location
    Harrogate
    Posts
    1,012
    Looks very tidy under there. Gives hope that the rest of the chassis is good aswell. If you protect it properly now then you will get alot of life out of it.
    Yes i talk to myself, sometimes i need a professional opinion

  3. #23
    MR2 Enthusiast
    Join Date
    May 2016
    Location
    Warrington
    Posts
    649
    Looks beautiful :0)

  4. #24
    MR2 Newbie
    Join Date
    May 2017
    Location
    Guildford
    Posts
    64
    I thought I would give you all a quick update. I am still working on protecting the underneath and eventually managed to find a day free to get stuck in with the Dinitrol protection. I got the mud flap and front arch liners off to check for any areas where corrosion had started, rubbed it right back to clean metal, used RC900 to convert any rust, and then put new underslea on (Dinitrol 4941 I believe). I also used Dinitrol ML cavity wax in the sills etc.

    So far so good. I haven't found anything that worrying, just the middle "hole" in the mud flaps that had corroded away, but I am sure it will be happy enough with just 2 fixings anyway (can you still buy these new??).

    The rain was falling sporadically so I couldn't spend the whole day out there, but I have done one whole side and most of the small areas that needed touching up on the underneath.
    IMG_4185.jpg
    Rear arch:
    IMG_4183.jpg
    IMG_4182.jpg
    Front arch:
    IMG_4180.jpg
    IMG_4179.jpg

    More to do when I get another half day spare!

    Rich

  5. #25
    MR2 Enthusiast Sweetpea's Avatar
    Join Date
    Sep 2011
    Location
    Faversham
    Posts
    939
    That's unbelievably tidy. Blimey... It's as if it's only a couple of years old.
    There's no rust on my car. But there are some sizable holes where the rust fell out.

  6. #26
    MR2 Newbie
    Join Date
    May 2017
    Location
    Guildford
    Posts
    64
    It was a little bit messier before treatment but I didn't manage to get any before shots! I will try to do that when I tackle the other side. Luckily I haven't seen the need for a welder yet, so fingers crossed that continues.

  7. #27
    MR2 Enthusiast Sillyhatday's Avatar
    Join Date
    Sep 2016
    Location
    Doncaster
    Posts
    516
    Looks spot on under there now. I do try when washing to clean the traps out in the arches, that will help as much as the under seal. Nice to see you got some in the A pillar area. No mud or leaves in there and coated now.

  8. #28
    MR2 Obsessive Martin42006's Avatar
    Join Date
    Nov 2013
    Location
    Harrogate
    Posts
    1,012
    Does look nice and clean. would be great to see some before pics of the other side.
    Yes i talk to myself, sometimes i need a professional opinion

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •