Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Performance Parts

  1. #1
    MR2 Obsessive superwhite90's Avatar
    Join Date
    Jun 2010
    Location
    Wickford, Essex
    Posts
    3,448

    Performance Parts

    Taken from my 16v 4AGE Mr2

    Cat Cams

    252/260 - 8.5mm/9.0mm lift

    If anyone is interested these camshafts let me know and I hope we can come to an agreement on the price. They have only covered 1300 miles. I paid £421 for the cams, but would be willing to accept near £310.


    Cam specs:- http://www.catcams.co.uk/acatalog/7105137.pdf

    I will sell the pulleys without the camshafts for £45 or with the camshafts for £350. The pulleys are adjustable to plus/minus 10 degrees. They are manufactured by BLOX.


    The aluminium crank pulley probably won’t be up to much after it’s removed, but if there is minimal damage I’ll put it up here probably for a tenner or something.



    Please bear in mind, these parts are located in the UK and are priced without postage - obviously I am willing to post, so please send me your post/zip code so I can get you a cost.

    Cheers

    Alex
    Last edited by superwhite90; 28th August 2014 at 12:47 PM.

  2. #2
    Have sent you a pm

  3. #3
    MR2 Obsessive superwhite90's Avatar
    Join Date
    Jun 2010
    Location
    Wickford, Essex
    Posts
    3,448
    These will be going on eBay soon.

    The price I am offering is a bargain considering how much brand new the two items cost.

  4. #4
    MR2 Lurker
    Join Date
    Oct 2013
    Location
    Dunfermline
    Posts
    8
    Hi Superwhite,

    What performance profile would you expect with these cams? (Not trying to sound like a d**K! what kind of BHP could be expected? is it mainly an increase in top end power? Is the engine still driveable when driving normally?)

    Cheers

    G

    EDIT: Forget the above, Ive seen the spec for your motor and my crotchety engine isn't going to be worthy of that enhancement.
    Last edited by gruntus; 3rd September 2014 at 08:58 PM.

  5. #5
    MR2 Obsessive superwhite90's Avatar
    Join Date
    Jun 2010
    Location
    Wickford, Essex
    Posts
    3,448
    you can use them on yours no problem.

    ive had suspension issued so couldnt test car properly. better top end response.

  6. #6
    MR2 Obsessive superwhite90's Avatar
    Join Date
    Jun 2010
    Location
    Wickford, Essex
    Posts
    3,448
    Not for sale due to no interest and i'm going to have it tuned properly.

    Sorry.

  7. #7
    MR2 Fan
    Join Date
    Nov 2010
    Location
    herts
    Posts
    277
    U gonna change ecu ? I have done ae86 with megasquirt... if u go that route let me know. I might be able to help

    Sent from my GT-I9505 using Tapatalk

  8. #8
    MR2 Obsessive superwhite90's Avatar
    Join Date
    Jun 2010
    Location
    Wickford, Essex
    Posts
    3,448
    I'm not changing the ecu mate. I'm going to pay someone to tune it on a dyno

  9. #9
    MR2 Fan
    Join Date
    Nov 2010
    Location
    herts
    Posts
    277
    Be careful because there is not much that can be tuned on the original ecu..... I believe your being sold snake oil.....

    Sent from my GT-I9505 using Tapatalk

  10. #10
    MR2 Fan
    Join Date
    Nov 2010
    Location
    herts
    Posts
    277
    Unless you use a piggyback system only spark timing can be adjusted. .. and for that, one does not need a dyno. ...

    from past experience is fuelling that goes wrong with cams and its not adjustable without a piggyback or a new ecu

    Sent from my GT-I9505 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •