Breaking my 1989 mr2 due to never getting it running right and losing interest. All parts available and willing to post most parts. It has a full janspeed exhaust system
Breaking my 1989 mr2 due to never getting it running right and losing interest. All parts available and willing to post most parts. It has a full janspeed exhaust system
I'm interested in the ignition coil if it passes the test shown in the BGB (I already have three failed ones). Primary coil resistance between 0.5 and 0.7 ohm (measure between the negative and positive terminal) and secondary coil resistance between 11000 and 16000 ohm (measure between big central and positive terminal).
I'm also looking for an undamaged triangle trim bit that covers the side mirrors mounting screws. Passenger side
Last edited by BigBobo; 25th July 2014 at 12:01 PM.
Put your meter on resistance, join the leads together and see what it reads. The cheaper meters can read 0.2/0.3 (or higher) ohms. even a good quality meter is liable to read 0.1 ohms. So if your failed coils are failing on the primary resistance and are (for example ) around 0.5/1 ohm out of spec they may well be OK. It might just be that the meter/leads combination is making them read out of spec.
Black is not a colour ! .... Its the absence of colour
I am looking for a strut rod and bushings for the right rear passenger side if you are willing to part ways with it
I need one of the plastic caps for over the rear suspension mount if you've got one spare?
Screen wash bottle?
Andy and Jen
'86 Mica Blue T Bar
Volvo XC60 AWD