-
1st November 2011, 08:50 PM
#1
Supercharger Styling Parts and other US Japanese MR2 Mk1 Parts
After an engine lid off a Supercharger.
Also after the rear lighs and pannel. Are these a direct replacment for the UK Cars?
Also anything Genuine Toyota that can be used to make a Mk1 a little diferent to the UK cars. Will consider US parts and some aftermarket.
Thanks
-
1st November 2011, 10:23 PM
#2
MR2 Obsessive
The Supercharger lights are actually standard US lights for cars '87+ whether they are natually aspirated or supercharged. You can pick em up from the US as a set. But if you are picky you'll want the boot lock too and these are as rare as rocking horse shit.
Something like this
http://www.ebay.com/itm/1985-89-TOYO...sories&vxp=mtr
Last edited by superwhite90; 1st November 2011 at 10:32 PM.
-
2nd November 2011, 01:34 AM
#3
I see, thanks for the info. I saw some US lights off what may have been the earlier MK1's. There were very similar to the UK lights but with a diferent number plate pannel. Also there were circles in the red part of the lense, from memory.
Any idea what is required to change a UK car to Supercharger or US Lights. Has it been done?
Many thanks for your input
Also if anybody has any of these parts then be in touch, thanks
-
2nd November 2011, 10:37 AM
#4
MR2 Obsessive
You have to drill new holes for the bolts, you can re-use the gaskets if you don't muller them when you take them off.
Many people have done it, there are many threads on here. Oukie is the best man to ask. I have done mine too.
-
8th November 2011, 08:42 PM
#5
I heard my name
-
14th November 2011, 07:25 PM
#6
Any info or parts appreciated
-
14th November 2011, 09:41 PM
#7
FYI: The SC engine lid locks to the body in a different location than the NA version, and substantial modifications are required to make it fit right. You'll have to google it for how to do it.
-
15th November 2011, 02:37 AM
#8
Thanks for the info. I have a supercharger and N/A MR2 at the moment, I shall compare the two tomorow.
So, what needs to be done? Tried to google it but got nothing usefull.
Thanks
-
15th November 2011, 10:20 PM
#9
The lock bar on the lid needs to be moved left or right, can't remember which, or the locking mechanism on the body needs to be moved. Can't say that I recall the details. MR2oc.com probably has a few write ups on it, and that is where I have seen threads on it before.
-
16th November 2011, 03:44 AM
#10
I shall have a look, thanks.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules