Printable View
Hi All
My Mk1b T-Bar was bought with 15 inch mk3 alloys. The spare with it is a 14 inch teardrop. I would like to buy a matching, same size spare, in size 6J, either with or without tyre. I can collect within a 50 mile radius of Bishop Auckland or can pay postage.
Attachment 6263
Many thanks, Peter.
Bare in mind that 15" MK3 alloys came in 2 sizes, 15 x 6J front 15 x 6.5J rear. The size is cast into the rear of one of the spokes. I think the 6.5" should fit on the front ok but I've never tried it, I got a 6" one as a spare.
Attachment 6264
Hi Jimi
I knew that but didn't think to put it in my ad, doh!
I think the sensible thing is to look for a 6J wheel, then there's definitely no issues. I will try to edit my original post. Thanks!
https://www.ebay.co.uk/itm/163677480...AAAOSwi2ZZ4MP2
With a 185 tyre, that will be a front wheel
That wheel has had a hard paper round :D. Pickup only, unfortunately or I would have thought about it.
Appreciate the link though, Jimi :thumbup::
Aye, it was a big round
To be fair MK3 alloys were well known for bubbling paint from the factory, Mr T was replacing them under warranty as it was down to a poor factory coating, I'd bet the majority of PFL ones have been refurbished by now, I got mine powder coated many years ago, they still look good now.
https://www.mr2oc.co.uk/jimi/slides/2503090_05a.jpg
With UK spec centres
https://www.mr2oc.co.uk/index.php?&m...ew=resizeimage
With JDM spec centres
http://www.mr2mk1club.com/images/imp...IMG_7507-1.jpg
Your wheels look lovely, Jimi...Can I have one? :D
let me spend a millisecond thinking about that :DQuote:
Originally Posted by peterhardy123
A couple of mine originally didn't look much better than the one I linked to, that's why I got them cheapish. I ran them for 4 years (using a teardrop as a spare) until I got a spare MK3 wheel, then I got them all 5 bead blasted, powder coated and lacquered, (£35/wheel) that picture above was taken in 2009 when I got them back, here's a picture from Dec last year just after the MOT, wheels still look good
Attachment 6265
Yeah, they look good Jimi, as does the car :)
Well I will shortly have my 'new' wheel. I did a deal with a seller on eBay and it should be here Tuesday. It will need a refurb so open to any recommendations in the Bishop Auckland area. I've bought a new tyre to go with it, from Camskill.
Thanks to Jimi for his input :).
I should be able to get my money back by selling the other wheels that came with the car. There's a refurbed 14" pepperpot with a brand new tyre (which was the spare) and a full set of four 14" wheels fitted with what I was told are winter tyres. I won't need these as the car will be hibernating over winter. I need to have a thorough look at these to determine condition etc. and then I will look to advertise them.
Glad you got sorted. :) Look forward to seeing the before and after refurb photos. :+:
Thanks, Tom. Good idea re the photos. I will do that and put them up. :thumbup:
Pics as promised :p
Before
Attachment 6299 Attachment 6300 Attachment 6301 Attachment 6302 Attachment 6303
New Tyre, ready to go on :)
Attachment 6309
Refurbed wheel with tyre fitted. Now in the car as my spare :D
Attachment 6310 Attachment 6311 Attachment 6312 Attachment 6313
I've seen worse condition MK3 wheels, however it looks great now :cool:
What tyre have you gone for ?
Just noticed its a Toyo, same as my spare :thumbup:
Thanks, Jimi :+:
The wheels on the car were all shod with almost new Toyos so I decided to stay with the same for the spare.
I've just come back from your part of the world, bonnie Scotland. Had a few days with my youngest son with him doing all of the driving (as a learner) in his i20. Managed 875 miles going to Ayr, Oban, Ullapool, Perth and ending at Eyemouth. I was up there in June too on my bike (BMW K1300GT), clocking up just under 1,000 miles. Hopefully I will get to do something similar next year, but in the MR2 :D.