ENGINE FUSE BOX REPLACEMENT
The reason we changed the fuse box out was because the battery acid had eaten
away the fuse box and wiring causing the battery light on the dash to light. It
cut the power to the alt.
This is the harness we will be putting in
In the interior you need to pull the drivers seat there are four bolts. Where
you see the white marks
Then pull the door jam molding and the carpet behind the seat and follow the
wire and disconnect them
In the engine compartment you need to pull the battery
Pull the air cleaner 4 bolts
Now follow the wire and disconnect them
In the trunk remove the carpet and side moldings
Now follow the wires and disconnect them and pull thought the fire wall
Now run the new harness in and reconnect the wires, Its pretty straight
forward
