PDA

View Full Version : Mk1 4a-ge Timing belt fitting



Woodsport
20th June 2009, 04:26 PM
It's a bit of a Woodsport party trick this one, fitted in 35 minutes while you wait, and i supply the belt £50 :+:

Darth-Tickle
21st April 2011, 09:45 PM
Hi there.
I need to get the cam belt on my Mk1b T-bar done. I see that this post is quite old, but was wondering if there was some sort of deal (especially a while-you-wait deal) available now ? I'm doing a lot of work on my car myself, but this isn't something that appeals !

Woodsport
22nd April 2011, 06:56 AM
Yes i still offer this service, not sure what sort of deal you mean that's better than £50 supplied and fitted mind! :D

If you just let me know when you want to come here i can do this for you while you wait in under 40 minutes :+:

Darth-Tickle
22nd April 2011, 07:16 AM
Sold!!
I wanted to check that the £50 deal applied as it was a while ago that the original post was made. I'll pick a day next week and check you can fit me in... As it were, so speak :-)

Woodsport
22nd April 2011, 07:24 AM
No problem, just give me 2 days notice of when you are coming, my numbers are 07951304712 and 0191 3770962 :+:

Spitfire
13th December 2011, 04:14 PM
My son & I both have MK1's we live in Leeds so not to far . We would like you to do the belts on both cars in the new year, maybe sat 14th Jan. I have your numbers so will ring in new year, cheers

Woodsport
19th December 2011, 10:20 PM
Hi, i'm sorry but my garage is not open on Saturdays, i can do both belts one after the other during any weekday though, it'll only take 1.5 hours to do both.

Woodsport
25th May 2017, 06:52 AM
Just noticed this has the 2009 price, I am currently doing Mk1 cambelts for £80 supplied and fitted while you wait in under an hour (most around 40 mins), nobody in the world gets anywhere near that price or can do it as quickly.

Thanks Paul.

Woodsport
28th July 2017, 04:26 PM
A members car came to see us today for our renowned drive in drive out cambelt service, I see this on a good 40% of all 4age engines I work on, the exhaust cam pulley is one tooth out, and to compensate they fully retarded the ignition timing and set the fuel mixture rich to disguise the wrongly fitted belt.

This is surprisingly common.

http://www.mr2mk1club.com/images/imported/2017/07/oLLWh4u-1.jpg

My advice is to only have your cambelt replaced by a specialist, this particular car has been like this for 12 years and never ran right within that time.

Sent from my SM-G950F using Tapatalk

iankelly
29th July 2017, 05:32 PM
Just a note to compliment the service from Paul in the long overdue replacement of my cambelt (shown above)
My car is now running better than it ever has in the 12 years I have had it (to be fair, it highlights the importance of sending it to someone who knows what they are doing)
Normally I would write it off as the limit of my amateur diy skills but the very same car went into MrT for a full service service after I got it and it was not picked up!!!

Paul adjusted the timing and fuel mixtures and would take any more than the £80 quoted - best money I have spent and well worth the trip from Glasgow.

Cheers Paul.

iankelly
29th July 2017, 08:06 PM
Just a note to compliment the service from Paul in the long overdue replacement of my cambelt (shown above)
My car is now running better than it ever has in the 12 years I have had it (to be fair, it highlights the importance of sending it to someone who knows what they are doing)
Normally I would write it off as the limit of my amateur diy skills but the very same car went into MrT for a full service service after I got it and it was not picked up!!!

Paul adjusted the timing and fuel mixtures and would take any more than the £80 quoted - best money I have spent and well worth the trip from Glasgow.

Cheers Paul.

I obviously meant "...would NOT take any more than the £80" :-)

Woodsport
30th July 2017, 07:11 PM
You're very welcome Ian, glad we found the faults and you can now enjoy it properly.

skiinggrandad
20th September 2017, 09:14 PM
I just want to thank Paul for expert fitting of a new cambelt yesterday afternoon (I only phoned that morning!!) to my MK1b.The job was done in about 1hour inspite of the tensioner bolt flats being rounded and therefore spanner just turning! Soloution was to weld a larger nut to the bolt head and undo with a perfect fitting socket.
After running up to temp.Paul checked and reset idle rpm,along with a general "health check".All in all total time in his expert hands about 90 mins.Fantastic!!
Thanks again Paul(and Tony).

Woodsport
21st September 2017, 05:43 AM
You're more than welcome sir, normally they take well under an hour but yours threw me a little surprise problem.

Anything you need just ask, lovely example you have there.

philmk1
9th October 2022, 12:03 PM
Hi Paul do you still do timing belt changes?

Woodsport
10th October 2022, 07:19 AM
Hi Paul do you still do timing belt changes?

Sorry Phil we closed the workshop March 2020 when Covid hit, we operate online retail parts these days only.

philmk1
11th October 2022, 07:17 PM
Thanks Paul can you recommend any one?